Hey admin,
I have an airport simulation environment, so How can I view it, i mean how can I set the camera view position to view inside the airport?. I do not need to view outside so .
Here is the image of it
https://drive.google.com/file/d/14oQtGs ... sp=sharing
Kindly have a look into the above image for better understanding.
Hope for the positive response.
Best regards
Surendra Kumar
How to view inside the simulation environment?
Re: How to view inside the simulation environment?
Hello Kumar,
you can simply move the camera to the desired location. You will probably have to adjust a few of the camera settings, such as near/far clipping planes: those values will be used to determine from which distance to what distance things are visible, and at what speed you can shift the camera forward/backward (via the mouse roll).
From the screenshot, it looks like the imported airport environment is extremely small. So you'll have to greatly reduce the near/far clipping plane of the camera.
Cheers
you can simply move the camera to the desired location. You will probably have to adjust a few of the camera settings, such as near/far clipping planes: those values will be used to determine from which distance to what distance things are visible, and at what speed you can shift the camera forward/backward (via the mouse roll).
From the screenshot, it looks like the imported airport environment is extremely small. So you'll have to greatly reduce the near/far clipping plane of the camera.
Cheers